« R2 Project Log - It’s Alive!
Blog! »

R2 Project Log - Soldering complete!

I have finished soldering up r2, and have temporarily put him onto a microrobotics gearbox, until i can get round to making his custom aluminium motor mount / odometry harness, to get him as low as possible.

Now to write some software PWM code to get the motors running.

This entry was posted on Sunday, June 15th, 2008 at 10:13 am and is filed under Electronics, Micromouse, R2, Robotics. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.

2 Responses to “R2 Project Log - Soldering complete!”

  1. nitishkatal Says:
    July 19th, 2008 at 8:01 am

    Sir i am a micromouse aspirant can u plz help in knowin abt the hardware required for it as when i google it , i am confused cuz every onre is usin different hardware

  2. parag0n Says:
    July 27th, 2008 at 10:38 am

    There is no standard hardware used for micromouse, most micromouseers design their own.

    If you are looking for a simple micromouse kit, i’d suggest the PicOne kit from http://www.picone.co.uk/ , it is PicAXE based, and able to solve a maze once programmed.

Leave a Reply