45 Minute Project – £4.10 XBMC Remote Receiver

I’m a big fan of XBMC, and have an Ouya running XBMC set up in my lounge, streaming from my NAS. I normally use XBMC remote on my phone for controlling it, but this gets annoying when the phone is on charge, or I’m using it for something else. I noticed that the majority of […]

New Robot – Electronics

Over the weekend I ordered the mainboard for the new robot. It contains an arduino, battery voltage monitoring, battery regulation and a pair of motor driver chips. It is designed to sit on top of a hardcase 5Ah LIPO, with short leads going into the battery power output.

New Robot – Chassis Printed

Last night I retrieved the first chassis printout and did a test assembly with the parts that have arrived.  It looks good! The axle distance is perfect, the chunks I carved out for the pi are all the right sizes, and it looks bitchin.  The only negative was that the mount for the raspberry pi […]

New Robot – First Printed Parts

Before leaving the hackspace on saturday, I set the wheels and motor mounts for my robot printing, as I figured these parts probably wont change while I finish the rest of the design. Tonight, I cleaned up the printed parts, and did a test assembly of the track sets: They looked about right, so I […]

New Robot Teaser

Here is a teaser shot for my new rover robot, based around a raspberry pi and a massive lithium battery.  Fairly heavily inspired by Wlll’s ball collecting robot.  

3D printing – Bandsaw Fence

I spent some time earlier in the week getting the bandsaw at Hackspace Manchester working, so now its cutting again!  The main problem with the bandsaw is cutting straight, as it was an ebay purchase it diddnt come with a fence, so there was nothing to run the cut material against.  This model of bandsaw hasnt […]

Minimus Pin Functions v1.2

Got fed up of not having the interrupt identifiers on the original minimus pinout i made, so here is version 1.1 with interrupt numbers labelled! Stay tuned for a pinout of the Minimus 32K, as UK hackspacers have just bought over 300 of them to play with! UPDATE: I have checked the atmega32u2 datasheet, and […]

Slides from Raspberry Jam Manchester

I have been asked for th slides from the presentaion I gave at Raspberry Jam Manchester this past sunday, so here they are! PDF Format OpenOffice ODP Format Original source material for the Direct Python ID section was originally posted by Matt Lloyd at http://lwk.mjhosting.co.uk/?p=343 and http://lwk.mjhosting.co.uk/?p=376.  The Slice of Pi addon boarrd is available from […]

The PANIC Button

Ok, bit of explanation first.  We have an iMac set up as a ‘democratic jukebox’ at HAC:Manchester.  The idea being that anyone can put music on it, and it plays the entire library on shuffle during our hack sessions for a bit of background music. The problem is, of course, some people have an… odd […]