Spent some time today working on my fancy new hexapod 🙂
Take 2 Servos, and attach together as follows.
Mark out the legs on a piece of balsa wood, then score using a sharp knife until they detach from the rest of the piece of wood.
Drill out a hole for the servo horn, and 4 holes to attach cable ties through. these hold the legs together, and allow for easy remmoval and reattachment.
Do the same to the main board of the hexapod, drill out a hole for the attachment point of each leg, then 4 holes for cable ties. Then simply cable tie all the servo horns to the boards.
Screw the servo horns to the servos, and you’re done!